Home ] Up ] About TFS ]

Model FC-5 Film Cleaner

The model FC-5 is a 16/35mm dry, brush-vacuum type film cleaner which may be installed on film printers, high quality projection systems and Tele-Cine chains. With the FC-5 installed, film is automatically cleaned upon each pass through the printer or projector. This results in substantially cleaner film and labor savings.

The cleaner uses no solvents. This results in cost savings and elimination of offensive or dangerous fumes.

The Technical Film Systems model FC-1 to FC-5 type cleaners are installed in every major film laboratory in the western world. Tests have shown that when the cleaner was installed on the negative and raw-stock paths of a loop printer; after 500 continuous passes, the last print was cleaner than the first.

Power requirement: 110 VAC 60Hz 0.4 amp or 230 VAC 50Hz 0.2 amp

Vacuum requirement: 1.5 in. hose, 7 to 15 in. water (13-28mm Hg)

Shipping weight: 21 lbs. / 9.5kg

Dimensions (not including guide rollers): 10.01 in. wide X 6.50 in. high X 8.37 in. deep (254mm wide X 165mm high X 212mm deep)


Model FC-4 Film Cleaner

The model FC-4 is a 65/70mm dry, brush-vacuum type film cleaner.

Dimensions (not including guide rollers): 10.5 in. wide X 6.5 in. high X 10.75 in. deep (267mm wide X 165mm high X 273mm deep)

4725 Calle Quetzal
Camarillo, CA 93012-9101
tel: 805-384-9470
fax: 805-384-9471
email: techfilm@techfilmsystems.com